Fcs

420SS steel is a martensitic stainless steel known for its excellent hardness and corrosion resistance. After heat treatment, it can achieve high hardness while maintaining a certain degree of toughness, making it very suitable for manufacturing parts that require wear resistance and rust prevention, such as cutting tools, surgical instruments, and precision mechanical components.

1.2083 steel is suitable for die casting of steel, die and pressure tools and light non-ferrous metal alloys that are easily affected by corrosive plastic and polymer tools and inserts.

O1 mold steel is widely used. O1 steel has good processability, good wear resistance, stable O1 heat treatment performance, small dimensional deformation, but weak toughness and corrosion resistance. It is commonly used in blanking die, punching die, punching die, punching die, etc.

As a representative of high-end cold work die steel, D6 steel's core highlight lies in achieving excellent balance between wear resistance and crack resistance through high carbon and high chromium alloy design, and significantly improving dimensional stability through deep cryogenic treatment technology; D6 steel exhibits excellent deformation resistance and durability in harsh working conditions such as silicon steel sheet punching and precision processing of high-strength steel plates, while also possessing good corrosion resistance, making it an ideal choice for high-precision and high load mold manufacturing.

1.2714 steel material exhibits excellent thermal fatigue resistance and corrosion resistance in die casting applications, and its microstructural stability enables it to maintain performance under long-term thermal cycling conditions. Compared to similar materials, 1.2714 steel has better resistance to softening and processing adaptability, making it the preferred material for high-end hot work molds.

3Cr17NiMo MOD STEEl is a kind of pre hardened and tempered plastic tool steel. Excellent corrosion resistance, excellent wear resistance and toughness, good thermal fatigue resistance, uniform material hardness and superior polishing performance. 3Cr17NiMo MOD STEEL is especially suitable for thermoplastic corrosive plastics, transparent and mirror products and molds.

1.2316 is a kind of pre hardened and tempered plastic tool steel. Excellent corrosion resistance, excellent wear resistance and toughness, good thermal fatigue resistance, uniform material hardness and superior polishing performance. 1.2316 tool steel is especially suitable for thermoplastic corrosive plastics, transparent and mirror products and molds.

1.2767 steel has good wear resistance, high toughness, high hardness, high compressive strength, excellent dimensional stability, excellent corrosion resistance, good polishing and pin cutting performance, and easy to achieve mirror effect. Good hardenability, air cooling hardening, good machining performance.

SKD1 steel, as a classic cold work mold material, has achieved high hardness performance of 58-61HRC through optimized alloy ratio and heat treatment process, making it particularly suitable for cold stamping molds and scissor blades that require extreme wear resistance. SKD1 steel has excellent heat treatment stability. After quenching, low-temperature tempering can eliminate stress and minimize deformation during hot working. SKD1 steel can meet the precision forming requirements of complex molds and has a wide range of applications in fields such as automotive parts and electronic stamping.

D3 steel has good wear resistance and is suitable for making dies and punches with low impact load and high wear resistance, cold shear knives, drill sleeves, gauges, wire drawing dies, etc.